Sickrage not starting with Python 3

Hai,

I was running an old version of SR (somewaht 2018) on my Synology DSM 216j (its running on the latest firmware from this week)
In the header of the GUI of SR it was suggested to migrate to python 3.
Could not make a config backup of SR anymore, it hung.
I deleted SR
Installed python3 from the packages center (version 3.5.6-8 built by Alan Clarck)
Newest SR version is visalble in Packages center.
Installed it, which it does, but it will not start
Pytrhon 2 is still running aswell, as couchpatato, SabNZB, spotweb are depending on it.
Those are all runing ok.

What can I do?

Please help!

Bob

I will have to test out the latest synology package and see if there is an issue, give me a few days to do that please.

1 Like

Hay,

You wrote that a new version was released, thanks for that!
But in the packages of synology I only see the former version 9.4.211-1
Can you help out agian?

Bob

Did you get fix?
I tried the dev version post in synology package center it worked then an update was run and now it does not start.

I uninstalled rebooted and reinstalled python no change.

Dan

No,

I still have the 9.4.211-1 version that does instll, but will not start…

Bob

tried the latest dev version it seem to fail to start.
Below is from the package logs

2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 Begin preinst
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 End preinst ret=[0]
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 Begin /bin/rm -rf /volume1/@appstore/sickrage-dev
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 End /bin/rm -rf /volume1/@appstore/sickrage-dev ret=[0]
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 Begin /bin/mv -f /volume1/@tmp/pkginstall/package /volume1/@appstore/sickrage-dev
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 End /bin/mv -f /volume1/@tmp/pkginstall/package /volume1/@appstore/sickrage-dev ret=[0]
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 Begin /bin/rm -rf /var/packages/sickrage-dev
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 End /bin/rm -rf /var/packages/sickrage-dev ret=[0]
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 Begin /bin/mkdir -p /var/packages/sickrage-dev
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 End /bin/mkdir -p /var/packages/sickrage-dev ret=[0]
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 Begin /bin/mv -f /volume1/@tmp/pkginstall/INFO /var/packages/sickrage-dev/INFO
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 End /bin/mv -f /volume1/@tmp/pkginstall/INFO /var/packages/sickrage-dev/INFO ret=[0]
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 Begin /bin/rm -rf /var/packages/sickrage-dev/scripts
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 End /bin/rm -rf /var/packages/sickrage-dev/scripts ret=[0]
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 Begin /bin/mv -f /volume1/@tmp/pkginstall/scripts /var/packages/sickrage-dev/scripts
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 End /bin/mv -f /volume1/@tmp/pkginstall/scripts /var/packages/sickrage-dev/scripts ret=[0]
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 Begin /bin/rm -rf /var/packages/sickrage-dev/WIZARD_UIFILES
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 End /bin/rm -rf /var/packages/sickrage-dev/WIZARD_UIFILES ret=[0]
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 Begin /bin/mv -f /volume1/@tmp/pkginstall/WIZARD_UIFILES /var/packages/sickrage-dev/WIZARD_UIFILES
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 End /bin/mv -f /volume1/@tmp/pkginstall/WIZARD_UIFILES /var/packages/sickrage-dev/WIZARD_UIFILES ret=[0]
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 Begin /bin/rm -rf /var/packages/sickrage-dev/conf
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 End /bin/rm -rf /var/packages/sickrage-dev/conf ret=[0]
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 Begin /bin/mv -f /volume1/@tmp/pkginstall/conf /var/packages/sickrage-dev/conf
2020/07/31 18:36:50 install sickrage-dev 9.4.214.dev2-1 End /bin/mv -f /volume1/@tmp/pkginstall/conf /var/packages/sickrage-dev/conf ret=[0]
2020/07/31 18:36:51 install sickrage-dev 9.4.214.dev2-1 Begin postinst
2020/07/31 18:38:36 install sickrage-dev 9.4.214.dev2-1 End postinst ret=[0]
2020/07/31 18:38:36 install sickrage-dev 9.4.214.dev2-1 Begin /bin/rm -rf /volume1/@tmp/pkginstall
2020/07/31 18:38:36 install sickrage-dev 9.4.214.dev2-1 End /bin/rm -rf /volume1/@tmp/pkginstall ret=[0]
2020/07/31 18:38:36 install sickrage-dev 9.4.214.dev2-1 successfully
2020/07/31 18:38:40 install sickrage-dev: begin to start version 9.4.214.dev2-1
2020/07/31 18:38:40 install sickrage-dev 9.4.214.dev2-1 Begin pre-load apparmor
2020/07/31 18:38:40 install sickrage-dev 9.4.214.dev2-1 End pre-load apparmor ret=[0]
2020/07/31 18:38:40 install sickrage-dev 9.4.214.dev2-1 Begin start-stop-status start
2020/07/31 18:39:02 install sickrage-dev 9.4.214.dev2-1 End start-stop-status start ret=[1]
2020/07/31 18:39:03 (system) trigger sickrage-dev 9.4.214.dev2-1 Begin start-stop-status stop
2020/07/31 18:39:03 (system) trigger sickrage-dev 9.4.214.dev2-1 End start-stop-status stop ret=[0]
2020/07/31 18:39:03 (system) trigger sickrage-dev 9.4.214.dev2-1 Begin unload apparmor
2020/07/31 18:39:03 (system) trigger sickrage-dev 9.4.214.dev2-1 End unload apparmor ret=[0]
2020/07/31 18:39:04 stop sickrage-dev: begin to stop version 9.4.214.dev2-1
2020/07/31 18:39:04 stop sickrage-dev: stop version 9.4.214.dev2-1 successfully, result 0
2020/07/31 18:39:04 install sickrage-dev: start version 9.4.214.dev2-1 failed, result 272

Not sure waht 272 means but see it with both version 211 and the dev version
thanks
Dan

latest dev is being worked on to resolve this issue currently, please wait till a new release is out.

Also pushed out to stable master branch

Does this mean I should be able to see a new version on Synology?

Yes, latest is 9.4.215

1 Like

I seems to running smoothly now…
Thanks
Bob

1 Like

Hey there,

yes you can, please
i sent you an email with details…

Anyway I can get ssh access to your synology to take a look?

OK, I’m working on this still, I’m refactoring how Synology package is built to work with spksrc latest master branch changes, seems one of the requirements needs pyasn1 >= 0.4.6

Oh wow, thanks…
My technical knowlegde fails me in what you wrote.
Do i need to do something?
Can I close ssh or do you need it?

Bob

Still working on this, should have something shortly to resolve it, thanks for allowing me to test with you’re device.

OK, I have now resolved the issue on you’re Synology device and SR is currently running on stable branch, thank you!

Great!
Thank you so much!

Bob

1 Like

Hello,

Sickrage did not get anything after a restart of my Synology and that SabNZDB got hundreds of commands to download with all of them this result:

SABnzbd is niet geslaagd in het downloaden van “magnet:?xt=urn:btih:3dbe8fd1a50d9127d5c548119d80f951307c44c4&dn=Succession.S01E05.720p.WEB.H264-DEFLATE%5Brartv%5D&tr=http%3A%2F%2Ftracker.trackerfix.com%3A80%2Fannounce&tr=udp%3A%2F%2F9.rarbg.me%3A2710&tr=udp%3A%2F%2F9.rarbg.to%3A2710&tr=udp%3A%2F%2Fopen.demonii.com%3A1337%2Fannounce”

Klaar om 2020-08-17 22:18:48
Hoeveelheid gedownload 0 B

Resultaat van de opdracht:

Fase Mislukt
URL ophalen mislukt; Maximum aantal pogingen

Is something wrong with my settings?

Hope you can help again.

Bob

Not sure why SABnzbd would even be attempting to download a Torrent magnet file ???
What provider do you have setup and what search client ?